PILONE · 95MM² · CLASS 2 · SWA ARMOURED

95mm Steel Wire Armoured Cable

Class 2 stranded copper conductor with a galvanized steel wire armour layer between PVC insulation and outer sheath, for large industrial supply and main incoming feeders. Made on the Pilone line in Lahore.

Factory-direct price

Contact for quote

Message us for today’s rate

In stock

WhatsApp for today's rate

Prices track the daily copper rate. Coil and bulk pricing on request.

Specifications

Conductor resistance per IEC 60228 class 2. Current capacity and voltage drop per BS 7671, installation reference method C (clipped direct), 30°C ambient, PVC insulation, taken as the nearest published reference for armoured construction. Voltage rating and armour build are typical for PVC/SWA/PVC cable — confirm the exact construction with Pilone Cables. Derate for grouping and higher ambient temperature. Verify sizing with a licensed electrician for your installation.
Property	Value
Conductor	Plain annealed copper, class 2 stranded circular
Nominal area	95 mm²
Strand construction	37 / 1.78 mm
Max conductor resistance at 20°C	0.193 Ω/km
Current capacity, 2 loaded conductors	258 A
Current capacity, 3 loaded conductors	223 A
Voltage drop	0.46 mV/A/m
Voltage rating	600/1000 V (typical)
Insulation / sheath	PVC / PVC, 70°C conductor rating
Armour	Galvanized steel wire armour (SWA) between inner and outer PVC sheath
Conductor copper weight	≈ 844.6 kg/km
Typical use	Main incoming feeders and large industrial supply runs

Current capacity depends on how the cable is installed. Derate for grouping and high ambient temperature. Have a licensed electrician confirm the size for your load and run length — or start with the cable size calculator.

How far a 95 mm² run can go

Voltage drop sets the longest run before lights dim and motors struggle. BS 7671 allows 3% on lighting circuits and 5% on other circuits; on a 230 V single-phase supply that is 6.9 V and 11.5 V. At this cable's 0.46 mV/A/m, the longest one-way run is:

Longest one-way run for 95 mm² armoured cable, single-phase 230 V, at 0.46 mV/A/m. Loads shown up to the cable's 258 A capacity. Three-phase circuits allow longer runs.
Load	Lighting circuit (3%)	Other circuits (5%)
125 A	120 m	200 m
160 A	93 m	156 m
200 A	75 m	125 m
250 A	60 m	100 m

Check your own load and length with the voltage drop calculator. Every 100 m of each core holds 84.5 kg of copper; cable is priced from the day's copper rate, which is why each size up costs more.

Next size up or down

Armoured cable sizes either side of 95 mm², same reference conditions as the specification table.
Size	Current capacity, 2 loaded	Voltage drop	Copper per 100 m of core
70 mm²	213 A	0.63 mV/A/m	62.2 kg
95 mm² (this cable)	258 A	0.46 mV/A/m	84.5 kg

Other armoured sizes

Current capacity with two loaded conductors, BS 7671 reference method C, 30°C ambient. Same class 2 steel wire armoured construction in every size.

Frequently asked

What is the price of 95mm armoured cable in Pakistan?

The price moves with the daily copper rate, so we quote it the day you order. We sell factory-direct from Lahore, with no dealer margin on top. Message us on WhatsApp for today's price per meter.

What is 95mm armoured cable used for?

Main incoming feeders and large industrial supply runs. It carries 258 A with two loaded conductors on method C, and 223 A with three loaded conductors.

Can I get 95mm armoured cable delivered?

Yes. We dispatch from Lahore — courier for single coils, transport for bulk. Punjab arrives in 1–2 days, the rest of Pakistan in 2–4 days. See delivery details.

Send us the length and your city

We quote 95mm armoured cable at the day's copper rate and dispatch from the Lahore line. Tell us the run length and how many meters you need.